031-36650701
Isfahan office

021-88561531
Tehran office

Isfahan office

Tehran office

How to work with glue for installing tiles, ceramics and stone

last edition

presented by

shiva.jalaeikar
shiva.jalaeikar
روش کار با چسب برای نصب کاشی
What you read in this article

How to work with glue for installing tiles, ceramics and stone:
First, make a small wound under the work with an ax, then prepare special work tools

We moisten the dough with a little water and apply it to the wall with a special spatula to a size of about one square meter

Then we install and level the tile with a little pressure

After several hours, we perform the strapping operation and the work can be used after 48 hours.
There are three methods of spreading glue under the work:

1. With a comb spatula on the work surface 2. With a spoon spatula on the back of a tile or ceramic 3. Combined method

Comb method for small size tiles (below 20×30)

And it is used when the bottom of the work is very level and without waves.
The spoon and combined method is more suitable for installing large-sized ceramic tiles and when the work is not well aligned

And it is used if there is a wave.

 

 

Work after gluing:
The amount of glue used for smooth and level work is about 3.5 kg per square meter

And the amount of consumption under unsaf works is about 5 kg per square meter.

*The certainty about the strength and resistance of the adhesive style ceramic tile installation method depends on two important factors:

First, with the quality of the paste glue and

Second, the work experience of the instructor mentioned.

Our group uses first-class and high-quality adhesives with fresh production dates and not left in stock.

The installation operation is carried out in such a way that the tiles become significantly stronger and resist the impact.

 

* Usually, this opinion exists among people

which loosens its adhesive work after some time

And shouldn’t tile adhesive be used for installation in the bathroom?

Our answer to this doubt is that you should not worry about the strength.

In the installation of bathroom ceramic tiles, we mix some concrete glue with paste glue so that water does not penetrate into the glue.

And secondly, now waterproof adhesives have been produced, which are recommended for bathrooms.

**Powder glue is used to install floor tiles and ceramics

And it is usually combined with cement and stone powder.

The best floor mortar formula is 020 cement, 0.10 powder adhesive and 0.70 stone powder

And if there is no glue, 0.30 cement and 0.70 stone powder, third formula floor mortar, 0.20 cement, 0.5 concrete glue and 75% stone powder.

 

***final note: Before buying materials and especially glue, consult with your installer about the best glue.

 

Introducing our products

As you know, to buy accessories such as: tile adhesive , ceramic adhesive and porcelain adhesive; You should use your utmost care to choose the best quality. Because the poor quality of any of these products may cause irreparable damages. Vesta Chemical factory has years of experience as the basis of its products, so that it can offer the best to you dear ones. Other products that Vestashimi offers you with the best quality include: Sealing glue، Light block glue، anti-acid، Waterproofing، Nano look coating، Epoxy resin product، Roof insulation، concrete glue، Epoxy resin، strapping powder، thatch، Primer، Groot، Rebar planting paste، Epoxy glue is. Get in touch with Vestashimi for more services.

Leave a Reply

Your email address will not be published. Required fields are marked *

Similar articles