Hard polymer grout (CV620)

Product description

This product is an expanding mortar based on cement, hydraulic fillers and polymer materials.

Also, polymer grouts prepared with codes CV610, CV620 have polymer materials that have higher mechanical and pressure resistance than ordinary grout.

The difference between polymer grout and hard polymer is that coarse grain fillers with higher mechanical resistance are used in hard polymer grout.

This product is ready to use and does not need any other additives except water.

Remove any dirt, grease, paint, bitumen, excess cement mortar and dust from the surface.

The place of application should be washed 24 hours before application.

Uses

• Filling under the plate of the column of residential buildings
• Filling the chassis of industrial machines
• Filling the gap between the base of the bridges and the empty space between the column and the bridge
• Filling around water pipes through concrete walls
• Filling under the rails in the production line of factories
• Filling the empty spaces between two pieces of metal and concrete, concrete and concrete, brick and brick…

Advantages

• High compressive strength
• Resistant to atmospheric factors
• Without chloride and metal compounds
• Smooth and non-shrinking mortar for use with restrained expansion properties

consumption instruction

To use this product, we first pour 4 liters of clean water into a container with a capacity of 25 kilos of mortar, then we start adding grout powder to the water and at the same time we start mixing until the result becomes a smooth paste. .

After the dough is ready, we give it 10 minutes for the ingredients in the prepared dough to become consistent, then we start mixing again and the resulting mortar is ready to use.

We close the area around the desired area using a mold and pour the mortar to the desired level in the mold. Considering that this product has long-lasting resins,

You should wait until it dries. This mortar hardens more slowly than cement mortar, the final resistance time is approximately 28 days.

Packaging and storage conditions

Expiration Date: 1year after production.

Maintenance : Keep in +10 to +40 C, away from heat, away from heat, humidity and sunlight