Description of products
This product is produced in white and gray colors and is a mixture of hydraulic binders, mineral aggregates and organic additives. This glue is used for gluing tiles, ceramics, on all floor and wall surfaces in the interior and exterior of the building.
How and how much to use
Before starting the work, remove the dust particles that prevent the adhesion of the mortar from the work surface and behind the tile or ceramic. (The dust particles behind the tile must be cleaned and removed. To start the work, pour 4-5 liters of water along with 1-2 liters of concrete glue into a container with a capacity of 20 kg and slowly add the contents of a bag of two-component powder glue to it and mix it gently with a hand mixer. until a smooth and uniform dough is obtained. Spread the resulting mixture on the surface with a grade 6 notched trowel and place the tiles in place.
Then remove the air between the tile and the surface with uniform strokes. Then start laying the tiles and after 48 hours, tape the worked area.
Attention: Avoid moving on the treated surface for 48 hours.
In case of installation on old tiles, the glaze of the lower surface must be scratched at least to the extent of the old tile surface. (This is true for all tile and ceramic adhesive products.)
tip
It is recommended not to use it on plaster surfaces.
Packaging and storage conditions
Expiration Date: 1year after production.
Storage: Keep in +10 to +40 C, away from heat, humidity and direct sunshine.
There are no reviews yet.