What is the purpose of rebar planting?

Is the purpose of strengthening the structural elements?

Or is the purpose of implementation related to other public works in the building, etc.?

If the goal is to strengthen building elements,

For what elements is the reinforcement plan provided by rebar or bolt planting method?

In some cases of rebar and bolt installation, there is no need to perform calculations and appropriate details.

However, it is necessary to carry out detailed technical calculations for the installation of rebar or bolt, which is considered a part of the structural system.

In the meantime, investigating the failure modes of restraint and rebar planting in concrete (under tensile, shear or a combination of these loads)

And it is very important to prevent the occurrence of brittle failure states, especially in the performance of the structure in which issues related to ductility are discussed.

In the design of strengthening an element by planting rebar

Or Bolt at what levels do we need to implement and strengthen?

(horizontal, flat, inclined, vertical or ceiling surfaces).

Because some of the adhesive manufacturers planted some adhesives due to the liquefaction (flowing) property.

In this regard, they mention certain limitations in their production glue catalogs.

Is the implementation of rebar planting method supposed to be done on cracked concrete surfaces?

Or uncracked concrete surfaces?

This is one of the most important factors in choosing a glue.

Because many adhesives can only be used on uncracked concrete surfaces

They leave a good performance.

What are the current and future environmental conditions of the place strengthened by the implant method?

Is there a possibility that bolts and rebars will be subject to oxidation in the future or not?

Some adhesives will not be able to fully protect the implanted rebars and bolts in the future.

In fact, the non-influence of rebar planting glue from atmospheric and environmental factors must be a criterion in the choice of glue.

Concrete surfaces that are supposed to be drilled

Then, with the cleaning operation, dust and disturbing factors caused by drilling or sanding are removed from it.

When starting the injection of glue, are the rebars inside the holes completely dry, wet or submerged in water?

When starting the injection of glue, are the rebars inside the holes completely dry, wet or submerged in water? humidity stickiness

Introducing our products

As you know, to buy accessories such as: tile adhesive , ceramic adhesive and porcelain adhesive; You should use your utmost care to choose the best quality. Because the poor quality of any of these products may cause irreparable damages. Vesta Chemical factory has years of experience as the basis of its products, so that it can offer the best to you dear ones. Other products that Vestashimi offers you with the best quality include: Sealing glue، Light block glue، anti-acid، Waterproofing، Nano look coating، Epoxy resin product، Roof insulation، concrete glue، Epoxy resin، strapping powder، thatch، Primer، Groot، Rebar planting paste، Epoxy glue is. Get in touch with Vestashimi for more services.