Product description
CV100 powder tile adhesive is a mixture of hydraulic adhesive, mineral aggregates and organic additives.
– mixture of hydraulic binding agents, and organic additives that only has to be mixed with water or liquid admixture just before use.
Due to the change of construction methods in Iran and more use of prefabricated methods and ready-made walls that have a smoother surface under work, adhesives are used day by day.
On the one hand, the ease of working with this glue and its reasonable price have reduced the implementation costs and the duration of the work, and on the other hand, the high stickiness of this glue, while increasing the strength and durability, has reduced the amount of mortar consumed and, as a result, reduced the load. It is being built.
Application
1. Mix CV100 with 1 to 3 litter of concrete adhesive and 3 to 5 litter of clean water and stir until the mixture is completely free of lumps. Leave the mortar to mature for approx 5 minutes and the stir again. If necessary, add small amounts of water to adjust the desired consistency.
2. Apply CV100 according to the generally recognized rules of technology, using either the thin or medium bed method or the buttering –floating method. Allow for a skin formation time of approx 20 minutes. After the pot life has expired and the mortar begun to set, do not attempt to retemper the mortar by adding water and stirring again.
3- Structures that have volume contraction and expansion.
4- Precast concretes that have a smooth surface.
5- Buildings that require less weight and high execution speed.
Attention
Use paste tile adhesive chalk surfaces. Scratch at least 2/3 of colored or chalk surfaces before installation. • Don’t walk on the installed surfaces before 24 hours application.
instructions
Tiles and ceramics as well as the work surface must be completely cleaned with water. For each 20 kg bag, add 1 liter of BV800 concrete adhesive and 4 liters of water; Wait a little until the auxiliary materials are mixed and the glue becomes thick. Then stir the glue again and if it hardens a little, add water to it and use special combs to spread it on the desired surface, then put the tile in its place and stick it with uniform strokes. align The minimum suitable temperature for working with this glue is 10 degrees centigrade. The amount of glue consumption is directly related to the infrastructure of the work, but on average it is about 3 to 5 kilograms per square meter.
consumption instruction
میزان مخلوط شدن با چسب بتن | |||
---|---|---|---|
ردیف | مورد مصرف | میزان جذب آب | چسب بتن مورد نیاز برای یک کیسه ۲۰ کیلویی چسب پودری |
1 | کـاشی | ۵% الی ۱۲% | ۱ لیتـر |
2 | سرامیک | ۲ الی ۵ | ۱ الی ۲ لیتر |
3 | پرسـلان | ۱/۰% الی ۵/۰% | ۳ الی ۴ لیتر |
Methods of use
- Leveling under ceramic tiles
- The bottom surface of the tile must be free of dust and completely clean
- There should be no fat, oil, chemicals, paint, lime, etc. on the bottom surface.
- For proper use and more durability and adhesion, it is better to use the double bonding method, that is, applying glue on the lower surface of the installation and behind the tile, then placing the tile on the lower surface of the installation and hitting evenly on the tile.
- After the installation, the seams between the tiles should be cleaned and after 24 hours of installation, the strapping operation should be done.
- It is recommended to install ceramics on the facade up to a height of 4 meters and create an expansion joint every 36 to 40 square meters.
Indications
- It is special for gluing tiles and ceramics on smooth brick, cement and wall surfaces that are already tiled.
- Installation of various types of tiles, ceramics, and mosaics on the floor and walls of buildings, installation of craft stone facades; Stone cornices are possible with this adhesive and it is a suitable substitute for mortar with high adhesion, delicate and precise building works, underlayment of uneven wall surfaces are possible with this adhesive.
- Structures that have stretch, volume contraction and expansion.
- Precast concretes that have a smooth surface.
- Buildings that require less weight and high execution speed.
Packaging and storage conditions
Expiration Date: 1year after production.
Storage: Keep in +10 to +40 C, away from heat, humidity and direct sunshine.
There are no reviews yet.