031-36650701
Isfahan office

021-88561531
Tehran office

Isfahan office

Tehran office

Pool tile adhesive (CV300 + Highflex BV220)

Application

  • The external and internal environments of the building
  • Vertical and horizontal surfaces
  • Places exposed to moisture
  • Pool, jacuzzi, sauna

To order the product, click on the link below and complete the desired form. Our colleagues will contact you as soon as possible. You can also click the button contact us Talk to our colleagues.

Categories:

Product description

Pool tile adhesive is two-component and is the result of mixing CV300 standard powder adhesive with High flex BV220 liquid supplement.

This adhesive is waterproof and by creating a layer on the installation surface and behind the tile, it creates an extremely strong adhesive surface.

Pool tile adhesive is suitable for gluing tiles, ceramics and stones in wet environments such as swimming pools, saunas, jacuzzis, bathrooms, etc., which is prepared by polymer materials and shows high resistance to moisture and has high adhesion. The pool tile adhesive is two-component and is suitable for installing ceramic tiles on horizontal and vertical surfaces, as well as in the interior and exterior environments of the building. Its temperature resistance is from -20 to +70 degrees Celsius.

Property

The presence of powdered polymers as well as complementary liquid helps to improve sealing, flexibility, increase glue resistance in wet environments, reduce cracking and reduce shrinkage.

Application

  • The external and internal environments of the building
  • Vertical and horizontal surfaces
  • Places exposed to moisture
  • Pool, jacuzzi, sauna

How to use

First, you should clean the desired surface so that it is free of any dust, grease, etc.

Add the supplement liquid to the water and for one 20 kg bag, we should mix one liter of supplement and four liters of water and then gradually add the powder to it.

Using a mixer, stir the mixture until a uniform paste is obtained. Then we give the mortar 10 minutes to get consistency.

If needed, we add a little water to it and mix it again and start using it.

Using a toothed spatula, we apply the glue to the bottom surface and back of the tile and start installing.

tip

Keep in mind that before installation, the work surface must be cleaned from all particles of dust, grease and dirt on the back of the tile, and in case of installation on old tiles, the glaze of the old tile must be scratched at least two-thirds.

Packaging and storage conditions

Expiration Date: 1year after production.

Storage: Keep in +10 to +40 C, away from heat, humidity and direct sunshine.

Product color

white or gray

Special Weight

۱٫۴ gr/cm3

Mixing ratio with water

4 to 5 liters of water for each 20 kg bag

Suitable installation temperature

10 to 40 degrees Celsius

Operational time

one hour

Complete drying time

48 hours after installation

time of tying

48 hours after installation

Mortar thickness for installation

3 to 6 mm

Maintenance

away from direct sunlight and moisture

Tensile strength

At least 0.5 N/mm2

There are no reviews yet.

Be the first to review “Pool tile adhesive (CV300 + Highflex BV220)”

Your email address will not be published. Required fields are marked *

Related products