Product description
This product has all the conditions and characteristics of standard tile adhesive and is armed with cellulose fibers, and by adding water to it, an adhesive with high adhesive strength and resistance to mechanical pressure is obtained. The method of using this product is the same as the standard tile adhesive.
Property
Among the merits of this glue are high mechanical resistance, reduced permeability, high chemical resistance against destructive agents and resistance to severe mechanical shocks.
By adding the aforementioned fibers, reducing fragility and increasing fire resistance have been added to its properties, and as a result, it shows higher resistance during fire. Since these fibers have high tensile strength, their use in adhesive increases the tensile strength of tile adhesive, and if the tile adhesive is exposed to tensile stress, the fibers spread this stress. Also, the fibers prevent the growth of cracks and prevent them from spreading like a bridge.
Application
This adhesive is used for gluing tiles, ceramics, porcelain, natural and artificial stones on all cement, stone, brick, ceramic, plaster, etc. surfaces on the floor and wall in indoor and outdoor environments (building facade). .
This adhesive is used for gluing tiles, ceramics, porcelain, natural and artificial stones on all cement, stone, brick, ceramic, plaster, etc. surfaces on the floor and wall in indoor and outdoor environments (building facade). .
Method of Use
To install ceramics or large-sized porcelain on the wall, use BV220 complementary liquid, at least one liter per bag.This supplement increases the adhesion and also accelerates the drying time of the glue. Avoid adding other supplements. Mix one liter of supplement with 3.5 liters of water in a container. Then a 20 kg powder glue envelope is slowly added to the ingredients and mixed with a mixer. In order to install porcelain, ceramic and stone, make sure to use double connection in this way, by first applying the glue to their backs using a toothed spatula, and then apply the glue on the intended wall, using double connection and making uniform strokes. , make the air out of the surfaces.
Note: It should be noted that when installing large size products, due to the double connection, the consumption of glue will be slightly higher.
Packaging and storage conditions
Expiration Date: 1year after production.
Storage: Keep in +10 to +40 C, away from heat, humidity and direct sunshine.
There are no reviews yet.